23
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
In order the service brake works correctly, the hand brake needs to be deactivated, i.e. the guiding
blocks must allow the movement of braking levers when the braking roller is ejected. The braking
roller shall be in its original position – its screw rod needs to be inserted.
After having disconnected the brake system from the pressure air source (tractor), the axle brake is
set using the air from pressure reservoir. After having released the brake, for ex. in order to handle
without the pressure air source in emergency case, use the releasing valve on the brake distributor
located on the tow bar.
GUIDING BLOCK OF HAND
BRAKE MECHANISMS
BRAKE
DISTRIBUTOR
RELEASING VALVE
