Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
28
│
56
SECURE THE POSITION OF THE TRANSPORT AXLE …K800-1000PS = TRANSPORT HEIGHT UP TO 4m
o
When the folding of the machine into the transport position is complete, the axle must be secured in the
transport position by flipping the backstop of the axle. Secure the backstop with a pin so that it cannot
come loose. Then, release the axle control circuit (MARKED WITH YELLOW RINGS) from the driver’s
position into the floating position to lower the machine down to the end, thus achieving the transport
position of 4m.
5.3.2
PUTTING THE MACHINE INTO THE WORKING POSITION
RELEASE THE SIDE FRAMES BEFORE UNFOLDING …K500-800PS
o
Before starting to unfold the K500-800PS machines, you must release the mechanical connecting rod.
Failure to do so will damage the machine.
RELEASE THE SIDE FRAMES BEFORE UNFOLDING…K1000PS
o
Before starting to unfold the K1000PS machine, you must release the ball valves on the piston-rods for
unfolding into the “OPEN” position.
CONNECTING ROD
RELEASED
BALL VALVE
OPEN
