Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
29
│
56
RELEASE THE SIDE FRAMES INTO THE WORKING POSITION
o
Unfold the side frames continuously into the working position by pressurizing the hydraulic circuit
marked with two red rings.
o
In K1000PS, the process of unfolding is automated, i.e. the machine unfolds automatically when the
circuit is pressurized. Pressurize the circuit until the machine is fully unfolded and the piston-rods are
completely drawn in.
o
A pressure accumulator with a manometer with gas pressure at 55bar is used for K1000PS due to the
down pressure on the outside right frame of the machine (in the direction of driving) into the hydraulic
circuit. After unfolding the machine into the working position, pressurise the circuit to a pressure of 55
bar.
