Manual
KOMPAKTOMAT K300P | K400PS | K450PS
32
│
44
7.6.2
SETTING THE PRESSURE OF THE FINISHING ROLLER
The pressure mechanism of the finishing roller allows you to adjust the traction of the traction spring in
three positions.
To change the traction, use the level provided which you fix to the spring seating segment and shift
along the rack with a swaying movement.
When adjusting the pressure, always observe work safety rules.
8.
AGGREGATION WITH OTHER EQUIPMENT
Semi-carried Kompaktomat machines can be optionally equipped with a three-point hitch TPH 2 for
aggregation with other equipment.
Other equipment means carried equipment, such as crumbling rollers with cross-kill wheels, pneumatic
drill machine or mechanical drill machine.
Only machines with the same working coverage as the Kompaktomat can be aggregated.
When aggregating Kompaktomat and additional machine, always observe safety regulations and
exercise increased caution.
Perform aggregation on a flat and reinforced surface.
Aggregation requires the assistance of another trained worker who will help you.
It is only allowed to enter the area between the Kompaktomat and additional machine when both
machines are in standstill.
Only equipment that allows continuous tracing of the terrain can be aggregated with Kompaktomat. It
is not possible to aggregate, for example, a drill machine without travelling wheels.
The aggregated machine changes the load on the Kompaktomat axle and the properties of driving,
therefore exercise increased caution when driving with the set of Kompaktomat and aggregated
machine.
When driving such a set, always observe valid road traffic regulations.
When working with the set of TRACTOR
KOMPAKTOMAT
OTHER EQUIPMENT, always observe the
labour safety rules for working with Kompaktomat and another machine as well as the rules of safe road
transportation.
Maximum pressure
Minimum pressure
Medium pressure
