Farmet K-300P, Руководство по эксплуатации

Страница: 16 / 44

Manual
KOMPAKTOMAT K300P | K400PS | K450PS
16
│
44
CF – Section
The share section is equipped with slim chisels with the width of 7
cm in four rows. The section is suitable for processing soil in spring
when it is not suitable to pull wet soil out to the surface, or for
heavy soils. There is no leveller behind the chisels.
AP – Section
A universal share section is equipped with sweeps with the width
of 25 cm in two rows. The sweeps are mounted to frames with
geometry improving the permeability of plant residues. Therefore,
this section is suitable for land with a higher occurrence of crushed
plant residues as well as for heavy soils. There is a leveller behind
the sweeps.
AL CF AP
Number of rows of shares (pieces) / Row
spacing (mm)
2 / 400 4 / 240 2 / 490
Leveller behind shares ●●●● ○○○○ ●●●●
All-area processing ●●●● ●●●○ ●●●●
Suitable for light soils ●●●● ●●●● ●●●●
Suitable for medium soils ●●●○ ●●●○ ●●●●
Suitable for heavy soils ●●●○ ●●●○ ●●●●
Suitable for rocky soils ●●●○ ●●●○ ●●●●
Suitable for wet soils ●●○○ ●●●● ●●○○
Resistance to clogging ●●○○ ●●●○ ●●●○
● – MAX /
○ - MIN
LEVELLING BARS BEHIND SHARES
LEVELLING BAR BEHIND SHARES
The levelling bar is applied behind the share sections. The bar is used
for levelling the loosened soil in front of the rear roller.
FINISHING OPERATIONS
LF - REAR FINISHING LEVELLING BAR
The levelling bar behind the rear roller levels and evenly spreads the
loosened soil.
RF - REAR FINISHING ROLLER
The finishing roller actively disintegrates any remaining clods behind the
rear roller. Be careful – the finishing roller cannot be used behind the two-
row crosskill rollers.