Manual
KOMPAKTOMAT K300P | K400PS | K450PS
27
│
44
7.2
ADJUSTING THE SPRING-MOUNTED FRONT LEVELLER
Correct position of the front leveller affects the resulting quality of processing.
When adjusting the position of the levellers, always observe generally valid labour safety regulations.
Perform the adjustment of front levellers when the machine is unfolded in the working position and
standing on the working sections at the same time.
The height of the front leveller is adjusted in relation to the size of clods and curvature of the field so
that the leveller is about 3 to 5 cm above the level of the working rollers when the machine is lowered
to the working rollers. When needed, the leveller may be set higher or lower.
FL – Front Fixed Serrated Levelling Bar
The automatic release of the leveller is protected by a draw spring. The spring is factory-set to the
length of 340mm; however, it is possible to change the preloading as needed. The spring preloading is
selected according to the character of the field (size of clods in the field). The bigger the clods are, the
higher the preloading needs to be.
Standardly, the levelling bar is adjusted mechanically and manually. The machine is equipped with an
auxiliary bar for easier manipulation.
FRONT LEVELLER VERSIONS (p. 13)
Min.320mm
Max.370mm
