Manual
KOMPAKTOMAT K300P | K400PS | K450PS
25
│
44
7.
ADJUSTING THE WORKING PARTS OF THE MACHINE
The position of the following individual working parts on the machine can be adjusted
o
Position and depth of the track cultivators
o
Height and down pressure of the front leveller
o
Depth of the shares
o
Position of the leveller behind the shares (only for sweeps)
o
Angle of the rear finishing levelling bar
The control of the front leveller position and the share depth setting can be either mechanical, or
automatic from the driver’s position.
7.1
ADJUSTING THE POSITION AND DEPTH OF THE TRACK
CULTIVATORS
Correct position of the track cultivator affects the resulting quality of processing.
The tractor track cultivator position can be adjusted either by height or length, as needed.
When adjusting the track cultivator position, always observe generally valid labour safety regulations.
The track cultivators are located on the beams of the pulling fork. The cultivator can be moved on the
beam so that it loosens the compacted tractor wheel tracks.
K300P-K450PS
Minimum cultivator setting width (mm)
1250
Maximum cultivator setting width (mm)
2400
K400PS-K450PS are equipped with a fixed pulling fork beam for the attachment of the track cultivators
with an invariable length of 2,400mm. Standardly, K400PS-K450PS are equipped with two cultivators,
i.e. one cultivator behind each tractor wheel. Optionally, the number of cultivators can be increased to 2
– 3 cultivators behind the tractor wheel.
CULTIVATOR VERSIONS (p. 13)
Maximum
Minimum
