Farm King 1450, Руководство оператора и каталог запасных частей

Страница: 21 / 74

21
Operation - 1450 Round Bale Carrier
Transporting Bale Carrier
WARNING
Do not tow over 20 mph (32 km/h) when loaded. Turn on flashing
lights when transporting on public roadways. Obey local
regulations regarding road transport. Raise bale lift arm and use
the safety chain when transporting. Ensure the lift arm chain latch
is used to prevent the safety chain from dislodging or loosening.
• Do not transport if end bale is overhanging beams. Beam
should extend beyond last bale for a minimum of 2' (61
cm).
• Raise lift arm prior to transport. Always engage lift
arm lock chains when transporting on public roadways
or when not in field. Lock chain in position with latch
provided.
• Monitor the condition and position of bales that are being
transported
• Slow speed when transporting over bumps or rough
terrain.
Unloading
NOTE: Do not run pusher all the way to the end, the resulting shock load may cause damage to
chain and drive.
DANGER
Make sure area is clear before unloading. Failure to do so
could result in serious injury or death.
• Extend tilt cylinder to raise carrier beam by engaging the tractor’s extension hydraulics.
• Depress and hold the pusher back switch to push the bales off the carrier beam.
• Once the rear bale has been pushed off the carrier, slowly drive forward while pushing the
bales back (unloading) to keep all bale ends in contact.
• When amber reflector on inside of the carrier beam becomes visible stop the pusher. The
reflector is approximately 26" (66cm) from the end of the beam.
Release pusher back and slowly drive forward to unload the last bale. Retract the tilt cylinder to
lower the beam and begin the next loading cycle.