Farm King 1450, Руководство оператора и каталог запасных частей

Страница: 13 / 74

13
Assembly - 1450 Round Bale Carrier
Assembly
CAUTION
Make sure area is clear of obstructions, well lit, and has sufficient
room for safe assembly. Do not work underneath raised assembly.
CAUTION
Ensure the carrier's tires and hitch are securely blocked.
Otherwise, verify the carrier is properly coupled to the drawbar on
a tractor with a minimum of 12480 lb (5660 kg).
Tandem Axle Assembly Installation
(Refer to Carrier Bundled Assembly Drawing)
• Raise the main assembly to a maximum of three feet to insert the tandem axle assembly
(A2400-14) on both sides. Make sure that the assembly is securely held in place. Support
assembly with the appropriate rated stands for the load.
• Insert the tandem axle assembly on to the axle beam (815319).
• Insert the tandem axle locator (C8005-00) between the tandem axle assembly bushings,
continue to insert the axle assembly.
• Insert nut (984077) and set screw (813547) into the locator.
• Install tires.
• Torque all fasteners to the torque specifications listed in the bolt torque section of this
manual.
• Lubricate axle and hubs; refer to lubrication section for details.
• Recheck all bolt torques after first use.
Brace Weldment Installation
(Refer to Carrier Bundled Assembly Drawing)
• The carrier has six braces that need to be installed on the undercarriage of the main
assembly.
• All fasteners require a flat washer and a lock nut.
• Loosely assemble and fasten all braces.
• Torque all hardware to the required torque specifications listed on the maintenance section
of this manual.
Tail Light Assembly
(Refer to Carrier Bundled Assembly Drawing)
• Remove and inspect all required hardware from parts box.
• Mount lights using fasteners supplied.
• Connect the taillight wiring harnesses to their appropriate connections.
• Connect main lighting plug to tractor.
• Test by verifying correct lamps illuminate when signalling and braking.