Farm King 1066, Руководство оператора и каталог запасных частей

Страница: 13 / 28

13
Assembly - 1066 & 1076 Conventional Auger
10. Assemble the undercarriage
1066 Model
Remove track stop pin (Ref. #118) from the end of the track, install track car (Ref. #50) onto the
top end of the track, and then replace track stop pin prior to using the auger. Failure to do so
could cause the auger to collapse.
Attach the rear lift arms (Ref. #35L & #35R) to the track car using one 3/16" x 1-1/2" cotter pin
(Ref. #53) for each arm. Attach the front lift arms (Ref. #36 & #37) to the front undercarriage
mount using one 3/16" x 1-1/2" cotter pin (Ref. #53) for each arm.
Lift the auger tube and position the arms so that the pivot rod (Ref. #41) can be inserted into
the four arms as shown. Secure the piviot rod by inserting 1/4" x 2" cotter pins with 1" x 14 ga
bushings (Ref. #42).
Attach the axle (Ref. #34) to the front arms. Use four 1/2" x 1-1/2" bolt, nut and lockwasher
combinations (Ref. #40).
Secure the front and rear arms by inserting one 3/8" x 1" bolt, nut and lockwasher combination
(Ref. #39) into the cross bracing connecting the front arms together and the rear arms together.
Mount the long cross braces (Ref. #38) on the rear arms using the 3/8" x 1" bolt, nut and
lockwasher combinations.
Mount wheels (Ref. #43)
1076 Model
Remove track stop pin (Ref. #118) from the end of the track, install track car (Ref. #50) onto the
top end of the track, and then replace track stop pin prior to using the auger. Failure to do so
could cause the auger to collapse.
Attach the rear lift arms (Ref. #35L & #35R) to the track car using one 3/16" x 1-1/2" cotter pin
(Ref. #53) for each arm. Attach the front lift arms (Ref. #36 & #37) to the front undercarriage
mount using one 3/16" x 1-1/2" cotter pin (Ref. #53) for each arm.
Lift the auger tube and position the arms so that the pivot rod (Ref. #41) can be inserted into
the four arms as shown. Secure the pivot rod by inserting 3/8" x 1-3/4" bolt, nut and lockwasher
combinations with 1-1/4" x 14 ga. bushings (Ref. #42)
Attach the axle (Ref. #34) to the front arms by inserting the undercarriage spindle and hub (Ref.
#59) through the front arms and into the axle. Use two 1/2" x 3-1/2" bolt, nut and lockwasher
combinations (Ref. #58) to secure the spindle and hub to the axle.
Secure the front and rear arms by inserting one 3/8" x 1" bolt, nut and lockwasher combination
(Ref. #39) into the cross bracing connecting the front arms together and the rear arms together.
Mount the cross bars (Ref. #19 & 20) using 3/8" x 5" bolt, nut and lockwasher combinations
(Ref. #21). Mount the long cross braces (Ref. #38) to the front and rear arms using the 3/8" x
1" bolt, nut and lockwasher combinations (Ref. #39) and 3/8" x 1-1/2" bolt, nut and lockwasher
combination (Ref. #39A).
Mount wheels (Ref. #43)