RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C30e Card Printer User Guide (Rev. 1.1)
4-16
Resolving the No Magnetic Encoder Installed Error (continued)
Step Procedure
2 Press
the
Cancel Print
button on the Driver Monitor Error Display Message.
3
Reboot the Printer by cycling the power.
4
Verify that the Printer has a Magnetic Encoder installed.
a. Open the front cover.
b. Verify that the Printer has a Magnetic Module installed. (
Note:
If the
Printer is equipped with a Magnetic Encoder Module, ensure that it is
seated securely into the Magnetic Module docking station. If the issue
persists, replace the Magnetic Module. See the Persona C30e service
manual for replacement procedures.)
5
If the Printer has no Magnetic Encoder Module, verify that the encoding data
was sent in error, check the appropriate software user’s manual for encoding
instructions.
