RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C30e Card Printer User Guide (Rev. 1.1)
6-116
Using the Resin Heat (K) Adjustment (Settings)
Printer uses when printing with the resin black panel(s) of a full-color Ribbon or when printing
with a resin-only Ribbon by adjusting the
Resin Heat
slide.
Step Procedure
1
Adjust the Resin Heat, Front (K) or the Resin Head, Back (K) as needed.
•
Move the slider to the left to cause less heat to be used in the printing
process, causing resin images to be lighter or less saturated.
OR
•
Move the slider to the right to (a) cause more heat to be used or (b)
cause the resin image to be darker or more saturated.
(
Note:
This control can be helpful for fine-tuning the transfer of resin text
and bar codes.)
