Faraday 8720, Руководство пользователя

Страница: 19 / 36

CHAPTER 2 |
DEVICE PROGRAMMING UNIT USER’S MANUAL
PROGRAMMING
15
• Connect the programming cable to the device to be
programmed. (Refer to Figure 2, pages 10-11.) When
the 8720 has detected the device, the display will
appear similar to the following:
8802 N/O ALARM
LOOP=1 ADDRESS=41
<LOOP ADDRESS>
<EXIT PROGRAM>
The top line of the display indicates the device type,
the contact state of the input and the device usage.
The next line shows the loop number and the
address to which the device will be set.
• To change the loop number or the address to which
the device will be set, press the LOOP or ADDRESS
button to move the cursor over the loop or address
number, then use the keypad to set the number.
The loop number will appear only if the 8720 has been
configured for label printing.
Press EXIT to return to the Main Menu.
• If the settings are correct, press PROGRAM to
program the device. If label printing is selected, up
to nine labels will be printed. If the device is
programmed correctly, the display will appear similar
to the following:
8802 N/O ALARM
LOOP=1 ADDRESS=41
PROGRAMMED OK
<EXIT CHANGE>
Press EXIT to return to the top of the programming
menu. Use the CHANGE button to go back and
change a setting.
firealarmresources.com