Faraday 8720, Руководство пользователя

Страница: 10 / 36

DEVICE PROGRAMMING UNIT USER’S MANUAL
| CHAPTER 1
6
INTRODUCTION
Make certain the switch inside the battery compart-
ment is set for the correct type of batteries. Setting
this switch for the wrong battery type and then
connecting to power may cause personal injury or
damage to the unit. Refer to the inside of the Battery
Compartment door on the bottom of the 8720 for a
description on how to set the correct battery type.
• Turn on the unit by pressing the power switch on
the left side of the 8720. The 8720 will initially
display a power up screen for about five seconds
and then will display the Main Menu as shown
below.
MAIN MENU:6000/7000
SELECT THE OPERATION
<LOOP TEST TEST>
<SETUP PROGRAM>
The top line indicates that this is the Main Menu
and also gives the system setting.
• If the system setting needs to be changed, press
SETUP then SYSTEM at the Main Menu. The display
will show:
SELECT SYSTEM
SYSTEM=6000/7000
CHANGE>
<EXIT DOWNLOAD>
Then press the CHANGE button to set the system
to be configured. Press EXIT twice to return to the
Main Menu.
firealarmresources.com