Faraday 8720, Руководство пользователя

Страница: 16 / 36

DEVICE PROGRAMMING UNIT USER’S MANUAL
| CHAPTER 2
12
PROGRAMMING
CHANGE to return to the loop and address setting
screen. Removing or disconnecting the device will
automatically increment the address and return to
the programming display.
The loop number is limited to 4 and the 6000/7000
device address is limited to 252. If the data is
entered out of range, the following screen will flash
for 3 seconds:
INCORRECT ENTRY!!!
If the unit could not be programmed correctly, the
display will show the message PROGRAMMING
FAILED and display a screen similar to the following:
LOOP=1 ADDRESS=111
PROGRAMMING FAILED
<EXIT RE-DO>
• Press RE-DO to return to the top level of the
programming display. Press EXIT to escape from
programming and return to the Main Menu. When
the device is removed, the 8720 will return to the
first programming screen.
When programming or testing devices using the pro-
gramming cable, the polarity of the programming cable
(position of locating tab) is not important because the
devices are not sensitive to polarity.
1000/1500 Detectors and Devices
In 1000/1500 systems, the 8720 is used only to set the
address of detectors or devices. The other configuration
data is sent from the programming tool.
firealarmresources.com