Faraday 8720, Руководство пользователя

Страница: 11 / 36

CHAPTER 1 |
DEVICE PROGRAMMING UNIT USER’S MANUAL
INTRODUCTION
7
• If the optional label printer is to be used to print labels,
it is also necessary to set the number of labels to be
printed when the device is programmed. To do this,
press SETUP then PRINTER from the Main Menu.
The display will show:
PRINT LABELS
# OF COPIES=2
<BULK INC #>
<EXIT DEC #>
Use the INC # (increase number) or DEC # (de-
crease number) buttons to set the number of
copies between 0 and 9, then press EXIT twice to
return to the Main Menu.
When the number of copies is set to “0”, the label printer
is disabled.
Adjusting the LCD and Backlighting
The LCD contrast and the display backlighting may be
adjusted through the front panel.
• While the Main Menu is displayed on the 8720
press the “C” button on the keypad. The display will
show numbers that represent the settings for both
the LCD and backlight. LCD numbers run from 1 to
10 with the higher numbers corresponding to higher
contrast. Backlight numbers run from 1 to 10 with
the higher numbers corresponding to brighter
backlighting. Pressing BLT DOWN beyond 1 will
turn off the backlighting.
firealarmresources.com