ENGLISH
ENGLISH
GB-41
GB-40
Condensation strip
Furniture
door
(Figure 8)
Illustration of feet adjustment
NOTE:
The maximum adjustment height of the feet is 50 mm.
Check level
Front to Back
Spirit level
Check level side to side
About Power Connection
Cold Water Connection
WARNING!
For personal safety:
•
Do not use an extension cord or an adapter plug with this appliance.
•
Do not, under any circumstances, cut or remove the earthing.
•
Connection from the power cord.
WARNING!
Please close the hydrant after using.
Insure proper ground
exists before use
Electrical Requirements
Please look at the rating label to know the rating voltage and connect the dishwasher
to the appropriate power supply. Use the required fuse 10 amp, time delay fuse or
circuit breaker recommended and provide separate circuit serving only this appliance.
Electrical Connection
Ensure the voltage and frequency of the power being corresponds to those on the
rating plate. Only insert the plug into an electrical socket which is earthed properly.
If the electrical socket to which the appliance must be connected is not appropriate
for the plug , replace the socket, rather than using a adaptors or the like as they could
cause overheating and burns.
Connect the cold water supply hose to a threaded 3/4(inch)
connector and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure that
the water is clear. This precaution is needed to avoid the risk
of the water inlet to be blocked and damage the appliance.
