FAR LVFI4515PI, Инструкция по эксплуатации

Страница: 37 / 47

ENGLISH ENGLISH
GB-29 GB-28
STARTING A WASHING PROGRAM
Wash Cycle Table
NOTE: ( ) Means: need to fill rinse into the Rinse-Aid Dispenser.
Water consumption doesn’t include regeneration water.
Program Cycle Selection
Information
Description of
Cycle
Detergent
pre/main
Running
time (min)
Energy
(Kwh)
Water
(L)
Rinse
Aid
P1
Intensive
For heaviest
soiled
crockery,
and normally
soiled pots>
pans> dishes
etc with dried
on soiling.
Prewash (50°C)
Wash (65°C )
Rinse
Rinse
Rinse (55°C)
Drying
5/25g
(or 3in1)
140 1.45 19
P2
Normal
For normally
soiled loads,
such as pots,
plates, glasses
and lightly
soiled pans.
Prewash (45°C)
Wash (55°C)
Rinse
Rinse (65°C)
Drying 5/25g
(or 3in1)
160 1.35 15
P3
ECO
(* EN
50242)
This is
standard
programme, it
is suitable to
clean normally
soiled
tableware
and it is the
most efficient
programme
in terms of
its combined
energy
and water
consumption
for that type
of tableware.
Prewash
Wash (50°C)
Rinse
Rinse (60°C)
Drying 5/25g
(or 3in1)
170 1.02 12
NOTE:
*EN 50242 : This programme is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
• Capacity: 12 setting
• Position Upper basket: upper wheels on rails
• Rinse aid setting: 6
• Pl: 0.49w; Po: 0.45w.
Program Cycle Selection
Information
Description of
Cycle
Detergent
pre/main
Running
time (min)
Energy
(Kwh)
Water
(L)
Rinse
Aid
P4
Glass
For lightly
soiled loads,
such as
glasses, crystal
and fine china.
Pre-wash
Wash (40°C)
Rinse
Rinse (60°C)
Drying 5/25g 120 0.85 15
P5
1 Hour
For lightly
soiled loads
that do not
need excellent
drying
efficiency.
Pre-wash (50°C)
Wash (60°C)
Rinse (55°C)
Drying 5/25g 60 1.0 10
P6
Rapid
A shorter wash
for lightly
soiled loads
that do not
need drying.
Wash (40°C)
Rinse
Rinse (45°C) 20g 40 0.6 11.5
Turning On the Appliance
Starting a cycle wash
1.
Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one
(see the section entitled “Loading the Dishwasher” ).
2.
Pour in the detergent (see the section entitled “Salt, Detergent and Rinse Aid”).
3.
Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ,
the specification of the socket is 10A 250VAC. Make sure that the water supply is
turned on to full pressure.