ENGLISH
ENGLISH
GB-9
GB-8
DESCRIPTION OF THE DEVICE
1. Thermostat
2. Refrigerator Glass Shelf
3. Crisper Cover
4. Salad Crisper
5. Freezer Drawer
6. Adjusting foot
7. Bottle rack
NOTE:
The appliance design is subject to change
without prior notice.
INSTALLATION
Position the appliance and allow it to stand for
two to three hours before it is turned on for
the first time to allow the system to settle. Do
not position next to any heat source e.g. cooker,
boiler or in direct sunlight etc.
Allow at least 10cm of space at the top and 10
cm of space on both sides of the appliance and
between the back of the appliance and the wall
for adequate air circulation. The appliance is not
designed for recessed installation (“building in”).
Install on a good firm level surface, and any
unevenness of the floor should be corrected
prior to installation, slight unevenness can be
overcome by adjusting the front feet.
NOTE:
If the appliance is positioned on a
carpet, soft floor covering you should readjust
the front feet once the appliance has had time to
settle.
