ENGLISH
ENGLISH
GB-33
GB-32
solvents (such as alcohol, acetone, banana oil,
etc.), boiling water, acid or alkaline items clean
refrigerator considering that this may damage
the fridge surface and interior. Boiling water
and benzene may deform or damage plastic
parts.
• Do not rinse with water so as not to affect the
electrical insulation properties.
• It is advisable to clean the appliance regularly
and to remove any food deposits or splashes;
in particular, clean the door seals, recesses and
adjacent parts.
• Don’t overlook parts of the appliance such as
the humidity controller, light casing, racks,
egg and butter compartments, ice cube tray,
and all of the drainage areas, etc.
• If the appliance is not kept clean and in good
condition, its surface could deteriorate and
inexorably affect the length of its service life,
and could lead to a dangerous situation.
• The appliance must not be steam cleaned.
• Use only a non-abrasive sponge, rinse with
clean water then dry thoroughly before putting
the parts back in place.
• Never use abrasive cleaning products or hard
TROUBLESHOOTING
Before calling for service please check the
following.
Power cut
If the internal temperature of the Fridge/Freezer
compartment is -18°C or less when the power
returns, your food is safe. The food in your
Fridge/Freezer will remain frozen for approx
16 hours with the door closed. Do not open the
Fridge/Freezer door more than necessary.
The Fridge/Freezer is exceptionally cold
You may have accidentally set the refrigerator
temperature to a higher position.
The Fridge/Freezer is exceptionally warm
The compressor may not be working. Set the
metal scrapers to clean the appliance, as they
could scratch the surfaces and break down the
coating.
• After cleaning, leave the inside of the
appliance to dry with the door open before
plugging it into the mains again.
• When re-stocking the appliance, be especially
careful not to hit, scratch, crack or break the
internal surfaces.
