Fanvil I20-T, Руководство пользователя

Страница: 21 / 67

[
䬂ܹ᭛ᄫ
]
Service port
Field Name Explanation
Web Server type Specify Web Server Type – HTTP or HTTPS
HTTP port
Port for web browser access. Default value is 80. To enhance security, change this from
the default. Setting this port to 0 will disable HTTP access.
Example: The IP address is 192.168.1.70 and the port value is 8090, the accessing
address is http://192.168.1.70:8090.
HTTPS port
Port for HTTPS access. Before using https, an https authentication certification must be
downloaded into the equipment.
Default value is 443. To enhance security, change this from the default.
Telnet port Port for Telnet access. The default is 23.
RTP port range
start
Set the beginning value for RTP Ports. Ports are dynamically allocated.
RTP port
quantity
Set the maximum quantity of RTP Ports. The default is 200.
Note:
1) Any changes made on this page require a reboot to become active.
2) It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024.Values less than
1024 are reserved.
3) If the HTTP port is set to 0, HTTP service will be disabled.