Fanvil I20-T, Руководство пользователя

Страница: 37 / 67

[
䬂ܹ᭛ᄫ
]
d) MCAST
Using multicast functionality can be simple and convenient to send notice to each member of the
multicast, through setting the multicast key on the device, sending multicast RTP stream to
pre-configured multicast address. By on the device configuration monitoring multicast address, listen to
and play the group multicast address send RTP stream.
MCAST Settings
Equipment can be set up to monitor up to 10 different multicast address, used to receive the
multicast address send multicast RTP stream.
In the Web interface setting change equipment receiving multicast RTP stream processing mode are:
set the ordinary priority and enable page priority.
z
Priority:
In the drop-down box to choose priority of ordinary calls the priority, if the priority of the incoming
flows of multicast RTP, lower precedence than the current common calls, device will automatically ignore
the group RTP flow. If the priority of the incoming flow of multicast RTP is higher than the current
common calls priority, device will automatically receive the group RTP stream, and keep the current
common calls in state. You can also choose to disable in the receiving threshold drop-down box, the
device will automatically ignore all local network multicast RTP stream.