manualshive.com logo in svg

Fanvil FV6030, Руководство пользователя

Поделиться
Скачать
Fanvil FV6030 Скачать руководство пользователя страница 16

                                                       
 

- 16 -

 

use BLF feature. 

When this configuration enable, the phone will subscribe the status of pointed phone each 60s: 

LED off means Idled, LED flash means ring and LED on means busy. 

 

/m MWI (Message waiting indication), means the number of this key is the number of voicemail 

 

User can configure MWI function according to the above chart: 8000 is mailbox number, @1 is 

using SIP1, user also can configure @2(SIP2),the rest lines can be deduced by analogy, if no use, 

is 8000/m,it will pass the SIP1 line in default,/m means MIW function is using. 

If there’s new voicemail, LED will blink and shows new message, after receiving, server will send 

current mail info to phone, after receiving new MWI order, LED will respond, if LED light is off, 

it means no new voicemail.       

/p Presence, means phone can check the status of other phone that has relevant numbers. 

   

User can configures presence function according to the above chart: 500 is number that search 

caller, @1 is using SIP1, user also can configure @2(SIP2),the rest lines can be deduced by 

analogy, if no use, is 500/p, it will pass the SIP1 line in default, /p means presence function is 

using. 

At this moment, press this button, it can show the correponding phone’s status (on, off, fail,) 

which LED don’t remind 

/f speed dial, user configure it as same time as above attribute, after configuring, phone will 

implement above function in priority, then considering to perform speed dial   

/i PUSH TO TALK, user presses this button in standby, the phone can call other phone and the 

other phone will auto answer.     

 

User can configure PUSH TO TALK according to the chart: 700 is number of callee. 

 

After configuring, the phone can call 700 and make 700 auto answer by pressing this button. 

 

z

 

SMS function 

Send message 

1.Press soft1 (SMS) key in standby, then press Soft1(new) key. After inputting SMS content, press 

Soft2(send)key to input callee’s number, next, press Soft2 again to send SMS.   

2. Press soft1 (SMS) key in standby, then press soft1(new) key. After inputting SMS content, 

press soft2( send) key, then memory key to send SMS. 

3. Press soft1 (SMS) key in standby, then press soft1(new) key. After inputting SMS content, 

press soft2(send) key, then pbook key to select your number to send SMS. 

4.after inputting SMS content, user can press soft2(send) key, then input “ #” and “the callee’s IP 

address”to send SMS. 

 

Browse Message and reply message 

when there’s new message, phone will ring and remind by a small envelope    on top of the screen, 

then press Soft1(SMS) key, and Soft2(Enter) key to browse current new message. when there are 

more new messages come in, user can choose by using up and down keys, then press Soft2(Enter) 

Содержание FV6030































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды