Fanvil FV6030 Скачать руководство пользователя страница 14

Страница: 14 / 62

- 14 -

Attended Transfer

During talk, press

and input the number that you want to transfer to and press Soft2

(Send). After that third party answers, then press

to complete the transfer. (You need

enable call waiting and call transfer first). If there are two calls, you can just talk to one, and keep

hold to the other one. The one who is keep hold can not speak to you or hear from you. In this

status, user can press * or Soft2 (Conf) to make calls mode in conference mode. If user wants to

stop conference, user can press Soft1 (Split). (User must enable call waiting and three way call

first).

Note: the server that user uses must support RFC3515 or it might not be used

Alert Transfer

During talk, press

firstly, then press Soft2(Send) after inputting the number that you

want to transfer. You are waiting for connection, now, press Soft2(Transf) and the transfer will be

done. (To use this feature, you need enable call waiting and call transfer first)

3.5. Call hold

During talking, user could press

to hold the current call. Press

again

to unhold the call or switch the call active. This feature is also available in 3-way conference call.

3.6. 3-way conference call

User can press Soft1 (Conf) to dial the line2 (press Soft1(Answer) to answer the call directly if

this call is from line2)during talking with line1. After line2 connect, user can press Soft2 (Conf) or

* to enter into conference mode. To back to line1 from conference, please press Soft1 (Split); to

end the call, please press Soft3 (End) or press

3.7. Switchboard Operator feature

User can press Soft1 (Conf) to dial the line2(press Soft1(Answer) to answer the call directly if this

call is from line2) during talking with line1. After line2 connect, user can press Soft1 (Switch) to

select which line you prefer to transfer, then press

to input the number you want to

transfer and press

again to do the transfer.

3.8. Call records

FV6030 supports 100 items of missed call, 100 items of incoming call, and 100 items of dialed

call. If the records are full, the newest will replace the oldest. If phone’s power cut or reboot, call

records will be discarded.

Missed call

Press

, and screen displays “Missed Call”. Press Soft2 (Enter), phone will show the

number and time of missed call. User can also use

to browse the missed call records,

Содержание FV6030































































Результаты поиска

Содержание FV6030

Отзывы:

Бренды по названию

Популярные бренды

Fanvil FV6030, Руководство пользователя

Результаты поиска

Содержание FV6030

Отзывы:

Бренды по названию

Популярные бренды