FantiniCosmi CH140GSM, Руководство пользователя

Страница: 4 / 36

Intellicomfort
4
* NOTE
The SIM used must conform to the GSM 11.12 phase 2+ standard (in
practice, any SIM of regular mobile operators but not the USIMs of mobile
operator: TRE). It must be linked to a top-up voice with SMS contract (if
necessary, verify the credit) or with a subscription contract and
the PIN
code must be disabled
.
Before inserting the SIM card it is advisable to verify that it works by using
it in a mobile phone and trying to send and receive an SMS.
After inserting the SIM and switching the CH140GSM on, any SMS
messages that have not yet been delivered or sent in the first moments of
operation will be cancelled.
ATTENTION: the 2 auxiliary inputs must be connected to contacts that are
dry and voltage-free and with cables no longer than 3 m.
GSM FUNCTIONALITY VERIFICATIONS
The programmable thermostat connection to the GSM network can be
detected by the antenna symbol and three bars.
The antenna symbol flashes if the module is not registered to the GSM network
(e.g. no coverage, SIM not inserted or blocked by PIN, etc.).
Once the registration is complete, the antenna lights up steady together with any
bars indicating the signal strength.
On
PAG08
of the
SETUP
menu you can see the quality of GSM coverage in real
time; the values are updated every three seconds. This feature is useful for testing
during installation if the position assumed is appropriate or not.
The following table shows the signal values and the corresponding messages
shown on the display.
Example: GSM: 18.0 means that the signal is good (two bars) and the communication
has no errors.
!
!