FantiniCosmi CH140GSM, Руководство пользователя

Страница: 18 / 36

Intellicomfort
18

DST YES/PAG07/Set
Select daylight saving time automatically, applicable in European countries
and some others. This settings allows the time to be automatically updated
when the hour is moved (March and October). Use or to switch
between YES and NO.
Use to go back to pag.1 (Winter/Summer); use
ENTER
to exit
PROG
.

GSM: RS,BE/PAG08/SEt
This page displays the level of the signal (RS= 2 digits) and the error rate
(BE= two digits) of the GSM line.
The table on page 5, shows the key of the values concerning the coverage
quality.
Example
: GSM: 18.0 means that the signal is good (two bars) and the
communication has no errors.

PROG
(pressed for long)

CONFIG.
The screen of day 1 is shown, with the graph of the temperatures every
half hour, the indication of the half hour and the associated temperature
(
).
Day 1 corresponds to Monday, and so on. Day H is the Holiday, which does not
vary during the week.
Use to move a half hour forward
Use or to move up or down from tA to t1 to t2 to t3.
Use
PROG
(pressed briefly) to change the day (1, 2, 3, 4, 5, 6, 7, H).
Use H to go to page 01 (Correction).
Use
PROG
(pressed for long) to go directly to page 2.
Use
COPY
to copy the temperature profile of the current day to the next day.
From page 01 onwards use
ENTER
to exit the programming.
Use to go to the previous half hour (even of the previous day)
Use at the beginning of day 1 to go directly to page 01 (correction).

Correction/PG01/XX.X°
It allows you to change the read temperature, which may not indicate the
actual temperature felt due to the installation being recessed in the wall or
maybe at a non-optimal height.