FantiniCosmi CH140GSM, Руководство пользователя

Страница: 27 / 36

Intellicomfort
CH140GSM
27

#JOL
command to set the Jolly mode
The reply message shows:
PROGRAM=JOLLY
REMOTE=JOLLY
The CH140GSM is in the Jolly mode (flashing to indicate the remote setting).

#T1=value
Sets the temperature value for T1
The value is written as TU.d, that is TensUnits.decimal (e.g
#T1=19.2
)
The Tens can be omitted (e.g. 9.0). The reply message shows the new value of T1

#T2=value
Sets the temperature value for T2
The value is written as TU.d, that is TensUnits.decimal (e.g
#T2=20.4
)
The Tens can be omitted (e.g. 9.0). The reply message shows the new value of T2

#T3=value
Sets the temperature value for T3
The value is written as TU.d, that is TensUnits.decimal (e.g
#T3=24.3
)
The Tens can be omitted (e.g. 9.0). The reply message shows the new value of
T3.

#TMAN=value
Sets the temperature value for the MANUAL program
The value is written as TU.d, that is TensUnits.decimal (e.g.
#TMAN=22.0
)
The Tens can be omitted (e.g. 9.0). The reply message shows the new value of
TMAN

#TJOL=value
Sets the temperature value for the JOLLY program
The value is written as TU.d, that is TensUnits.decimal (e.g.
#TJOL=24.0
)
The Tens can be omitted (e.g. 9.0). The reply message shows the new value of
TJOL