FantiniCosmi CH140GSM, Руководство пользователя

Страница: 11 / 36

Intellicomfort
CH140GSM
11
NOTE: if “SETUP” appears instead of “CONFIG”, you have released it too quickly
and must press
ENTER
to go back to the normal operating mode and try again.
When entering the “CONFIG” menu, the page that allows you to select the
desired temperature (T1/T2/T3/Ta) for every half hour of the day indicated
appears (from 1 to 7 to indicate the days from Monday to Sunday).
NOTE:
T1/T2/T3/Ta are displayed on the right side of the display with
the symbols:
Use the and keys to move a half hour to the right or left.
Use the and keys to switch from one set temperature to another.
Use
PROG
(pressed briefly) to go to the next day (DAY 1 -> 2 -> 3 -> 4 -> 5 -> 6 ->
7 -> H).
Press
COPY
to copy the temperature profile of the current day to the next day.
The Correction parameter page is accessed after H (profile of the Holiday daily
program).
Use
PROG
(pressed for long) or at the beginning of day 1 to go directly to the
Correction page.
From the Correction page onwards, use
ENTER
to exit from the “CONFIG”
menu.

“JOLLY” PROGRAM SETTINGS
In all programs except MAN, the temporary program is selected by pressing
the
JOLLY
key: this program allows you to define the desired temperature and
its duration in hours (up to a maximum of 240, that is, 10 days).
For example, it may be useful to keep a lower temperature throughout the
weekend if you are away from home.
Once this program is accessed, you can change the duration, which is initially
an hour, and increase the number of hours using the or decrease them
using the .
Press
TEMP
to display and change the Tj temperature using the and
keys.