fann MACS II, Руководство пользователя, Страница: 68 / 165

MACS II User Manual
101796668 Revision E 59
The Cell Bottom, Cell Top (Cap) and Drawer assemblies can be operated and moved
automatically. This is necessary to open the cell for loading the Slurry cup and
locking the cell back. The graphic on the screen pictorially depicts the position of the
cell.
1. Load Cell – The Load Cell operations raises the Cell and turns it to lock the
Bottom cell inside the Top Cell assembly.
2. UnLoad Cell – This is reverse of Load Cell operation. The cell is turned and
then lowered.
3. Update Status – This enquires the status of the cell and updates the graphic
on this screen.
4. Open Cap, Close Cap – These buttons raise and lower the Cell top and the
lid. This helps in replacing the O-ring and the back up ring.
5. Unlock, Lock – These two buttons rotate the cell to lock and unlock with the
Cell Top.
6. Raise Cell, Lower Cell – These buttons raise or lower the cell and mates or
unmates the Cell Bottom to Cell Top.
7. Open Drwr, Close Drwr – These buttons push in or pull out the drawer from
the frame so that a slurry cup can be loaded inside the cell.
Note that the MACS II unit does not perform certain
operations due to mechanical interference. For example, if
the cell is raised, then it is not possible to pull out the
drawer. The software flags such an operation as illegal.
If the cell is under pressure, none of the operations can be
performed until the pressure is released. In such a case all
elements of the screen are unavailable (gray).
8. Click Exit to close this dialog box.