fann MACS II Скачать руководство пользователя страница 54

Страница: 54 / 165

MACS II User Manual

101796668

Revision E

This screen manages the configuration constants for the dynamic and static

conditions for temperature control. Note that these are default values and only

experienced technicians should change these settings.
Click OK to save any changes and close this screen. Click Cancel to exit this screen

without saving any changes.

5.4.2.

Profile Editor

Click Edit > Profile Editor to display the Profile Editor screen to change various

settings and values for the testing procedure.

Figure 5-8 Profile Editor Screen

The Profile Editor is the portion of the program that sets up the test sequence.
The test sequence consists of the following parameters.

HH - Type the hour portion of the step time.

MM – Type the minute portion of the step time.

Temp. – Type the final temperature to be attained at the end of step time.

The program tries to set up a ramp so that the temperature is reached in

the time specified.

Содержание MACS II






































































































































































Результаты поиска

Содержание MACS II

Отзывы:

fann MACS II, Руководство пользователя, Страница: 54 / 165

Результаты поиска

Содержание MACS II

Отзывы: