fann MACS II Скачать руководство пользователя страница 50

Страница: 50 / 165

MACS II User Manual

101796668

Revision E

5.4.1.2.

Test Header Tab

From Edit Machine Settings, select Test Header and the Test Header screen

displays.

Figure 5-4 Test Header Tab Screen

Below is the explanation of this tab.

Test Header – By adding values here, the user can make these values default

so that these values do not have to be input every time the test information is

input.

Lab Name – Type the name of the Lab that is desired for every test

report. Generally this is the name of the Lab where machine is installed.

Customers List – Type names of Customers, so that users can pull

customer information on the test Information screen. This way

Customer name is always correct and consistent.

Cement Type List – Same as above, but this refers to types of cement

being used.

Events SGS – Type up to four values of SGS for which the program

should log the event and its corresponding time.

Events Time – Type up to four values of time foe which the program

should log the event and its corresponding value in SGS.

Содержание MACS II






































































































































































Результаты поиска

Содержание MACS II

Отзывы:

fann MACS II, Руководство пользователя, Страница: 50 / 165

Результаты поиска

Содержание MACS II

Отзывы: