fann MACS II Скачать руководство пользователя страница 33

Страница: 33 / 165

MACS II User Manual

101796668

Revision E

Once the installation wizard loads, read the start screen. Click Next.

Click Back to return to a previous screen in the wizard.

It is possible to exit the wizard at any time during the

install. Click Cancel to exit the installation wizard.

Rerun the installation wizard from the start when you wish

to complete the software installation.

Read the product information before proceeding. Optionally, click Save File to

save this information to the computer as a text file. Click Next.

Review the installer default locations. Click Next. For purposes of automatic

online updates, Fann recommends to not change these locations.

Read the National Instruments software license agreement. Click Next. If you do

not accept the agreement, the wizard terminates.

Read the Interchangeable Virtual Instruments, Inc. software license agreement.

Click Next. If you do not accept the agreement, the wizard terminates.

Review the list of software to be added to the computer. Optionally, click Save

File to save this information to the computer as a text file. Click Next to start the

installation process.

During the installation, the progress bars indicate the status of the progress in. To

stop the install, click Cancel at any time during the process. Rerun the

installation wizard from the start when you wish to complete the software

installation.

The installation wizard prompts upon completion of the installation. Click Finish.

10.Once the wizard exits, a message box displays prompting a restart of the

computer. Click Shut Down. This is necessary for the next step in the installation

process.

The computer must be powered “off” before connecting it

for the first time to the MACS II device via Universal Serial

Bus (USB).

4.3.3.

USB Connection Configuration

The MACS II system uses Universal Serial Bus (USB) plug and play interface

technology to communicate with the MACS II SGS software installed on a Microsoft

Windows-based computer. To connect the MACS II device for the first time to the

computer with the SGS software, setup the USB connection as follows:

Ensure that both the MACS II device and the computer are powered “off”.

Содержание MACS II






































































































































































Результаты поиска

Содержание MACS II

Отзывы:

fann MACS II, Руководство пользователя, Страница: 33 / 165

Результаты поиска

Содержание MACS II

Отзывы: