fann MACS II Скачать руководство пользователя страница 53

Страница: 53 / 165

MACS II User Manual

101796668

Revision E

Com Ports - In the Com Ports portion of the screen, use the arrow keys to

view a list of available options for Motor Com, Torque Com, and Temp &

Press Com. Alternatively, type the appropriate entry in the text boxes.

Do not change the COM ports unless you are instructed or

know the correct COM ports for each of the subsystems

Torque Select - The machine can be configured to work with three different

Torque sensor assemblies. Select the Torque Sensor that is installed on your

machine and select appropriate range for the chosen sensor.

Drive & Torque - This controls different aspects of the drive, filter, and

torque for the test. For each of these text boxes, type the appropriate value or

use the arrow keys to change the values up or down. The Drive ratio is fixed

at 10 and Filter size is set to 20. The SGS Reference should not be changed.

5.4.1.5.

PID Tab

From Edit Machine Settings, select PID and the PID screen displays.

Figure 5-7 PID Tab Screen

Содержание MACS II






































































































































































Результаты поиска

Содержание MACS II

Отзывы:

fann MACS II, Руководство пользователя, Страница: 53 / 165

Результаты поиска

Содержание MACS II

Отзывы: