background image

31

3/ PAIRING PROCEDURE REMOTE CONTROL / RECEIVER

By default, the remote control and the receiver are already paired together. If the remote control is not con-

nected to the receiver, please follow the steps below :

1/ Turn off the power of your ceiling fan using the circuit breaker or switch.

2/ Wait at least 30 seconds then turn on the power again.

3/ Within 30 seconds of turning on the power, press and hold the     button of the remote control for around 

5 seconds.

The receiver beeps when the synchronization is complete. You will then be able to use your remote control 

to control your ceiling fan.

4/ PAIR THE REMOTE CONTROL ON SEVERAL CEILING FANS

When several ceiling fans (DC technology with the same remote control) are installed, it’s possible to control 

all of them with only one single remote control. 

Repeat the above procedure PAIRING METHOD REMOTE CONTROL / RECEIVER with all the other ceiling 

fans that you want to synchronize on the same remote control.

5/ CHANGE THE RUNNING DIRECTION OF THE BLADES (SUMMER / WINTER MODE)

By default your ceiling fan rotates counterclockwise (summer mode). This mode allows the room to be re-

freshed by sending the cold air down and hot air at the top. The winter mode, meanwhile, will allow you to 

heat the room by sending hot air down (the blades turn in the opposite direction, clockwise).

To change the running direction of the blades, press and hold the button    on your remote control for about 

5 seconds.

F forward = S = Summer = counterclockwise rotation

R reverse = W = Winter = clockwise rotation

15. CLEANING AND MAINTENANCE

WARNING : Before cleaning your appliance, carefully read the safety instructions in this manual.

We recommend that you keep your unit clean and clean it at least once a month.

Do not use water or detergent to clean your ceiling fan. 

A dry, soft cloth will be preferable to avoid scratching the body of your ceiling fan and the blades. Vacuum 

dust from inaccessible places.

It is recommended to regularly check the condition of the ceiling fan and ceiling fan hanger bracket (at least 

twice a year depending on use). Due to frequent use of the ceiling fan, the screws will tend to loosen a little  

bit over time. Check and tighten the screws of the ceiling bracket, blades, motor cover, LED light kit or cover 

if necessary.

16. TROUBLESHOOTING

NOTE : Visit our Frequently Asked Questions section on our website (www.fanelite.com) for more 

information.

Содержание 100YFT-200 TIGA





































Отзывы: