Fanelite 100YFT-200 TIGA, Руководство пользователя, инструкция по установке и эксплуатации

Страница: 28 / 36

26
4/ INSTALL THE BLADES
Loosen and remove the 6 screws from the bottom of the motor block so that you can remove it.
Insert each blade in its location on the motor block then secure it with the screws using a suitable wrench.
Caution, tighten the screws carefully to avoid damaging the blades, but be sure to tighten properly to prevent
excessive vibration during start-up.
Once the blades are installed, replace the bottom part of the motor block using the 6 screws.
5/ INSTALL THE BOTTOM COVER
Carefully install the supplied bottom cap by screwing it on the axis (clockwise) until it locks in place.
Pale
Clé