F&P 950, Инструкция пользователя

Страница: 7 / 24

7
USER INSTRUCTIONS
User interface
Screen navigation
Mode banner
Displays current mode�
Standby button
Turn standby on/off�
Disconnect from
power source to
de-power the
humidifier�
Drop-down menu button
Access operating mode�
Menu button
Access information
and service menus�
Estimated dew point
Estimated dew point
of the gas reaching
the patient�
Caution LED
Lights up solid orange for
> 5 seconds when a
fault condition occurs�
Modes
The modes available will depend on the type of breathing circuit connected� The availability and operating principles for
each mode are shown below�
Breathing Circuit Kit Modes
Adult & Pediatric Breathing
Circuit Kits
Invasive mode is intended for
patients whose upper airways
have been bypassed by either a
tracheostomy or endotracheal
tube�
Mask mode is intended for
patients whose upper airways
have not been bypassed but are
receiving gas via a face mask
or similar�
Optiflow ™ mode is intended for
patients who require respiratory
therapy through an Optiflow
interface�
Neonatal Breathing Circuit Kit
(Additional modes disabled)
Neonatal mode is intended for
neonates who require respiratory
support�
Neonatal Breathing Circuit Kit
(Additional modes enabled)
Invasive mode is intended for
patients whose upper airways
have been bypassed by either a
tracheostomy or endotracheal
tube�
CPAP | NIV mode is intended for
patients whose upper airways
have not been bypassed and
are receiving positive pressure
therapy through a sealed or
nasal interface�
Optiflow mode is intended for
patients who require respiratory
therapy through an Optiflow
interface�
Optiflow Oxygen Kit
Optiflow mode is intended for
patients who require respiratory
therapy through an Optiflow
interface�