ASSEMBLY:
1. Take OFF the power.
2. Regulator put on the rail in the switchgearbox.
3. Connect supply: L to joint 1; N to joint 2.
4 Out cable of probe of temperature C1 connect to joints
10-11-12.
5. Out cable of probe of temperature C2 connect to joints 7-8-9.
6. System which enclose receiver is dependent from sensor C1
connect in line to joints 3-4.
7. System which enclose receiver is dependent from sensor C2
connect in line to joints 5-6
8. Set program to regulation temperature.
WIRING DIAGRAM
ATTENTION!
Do not any change in device. It impend break or wrong work of
device, it will cause break contolled device or menace for user. In
this cause producer is not responsible of arise accidents and
could refuse given warranty for regulator in cause submit a claim.
A090706
sensor
PT100
dimensions of sensor
Ø4; h=85mm
sensor isolation
steel bush
cable
PC 3×0,34mm˛; l=1,5m
PROBE RT56
TECHNICAL DATA
supply
230V AC
current load
2×(<16A)
joint
separated 1P
range of regulation temperature
-100÷400°C
hysteresis setting range
0÷100°C
precision
1°C
reconnection delay
0
model correction
±20°C
gradient
4°C /sec÷6°C/min.
sample frequency
1÷120 samples/min.
power consumption
1,5W
working temperature
-20÷40°C
terminal
screw terminals 2,5mm²
dimensions
3 modules (52,5mm)
fixing
on rail TH-35
÷45min
CRT-06
W
W
R
R
R
R
7
3
5
4
6
P2
P1
PT100
8
9
L
N
1
2
10
PT100
11
12
C2
C1
