Fancom LUMINA 71 Скачать руководство пользователя страница 23

Страница: 23 / 53

Lumina 71

Feed feeding place

Status feed place

Readout of the feed place status (value between the brackets):

•

FREE

: Feed place is free to use.

•

BUSY

: Feed place is currently feeding, you have to wait till this feed place is free.

•

BLOCK

: Feed place may not be used.

And setting to manually set the feed place status:

•

FREE

: The control computer can run the cycle.

•

BLOCKED

: The control computer will skip the cycle.

•

SKIP

: The control computer will skip the following cycle and then set the status of

this cycle to

FREE

. The amount intended to be given during this cycle will not be

supplied.

•

1-TIME, 2-TIMES, 3-TIMES

: The control computer will run the following cycle to

supply an amount. Then the status of this cycle will be set to

BLOCK

Curve

Setting of which feed curve is used for feeding.

Curve day

Setting of the curve day number.

Cycle

Setting of the feed cycle.

Animal weight

Setting of the animal weight.

Feeding method

Setting of the feeding method (

REGISTER

DOSING

DOSE/REGIST

Day Am.

Setting of the feed amount that will be dosed this day. The value between the brackets
indicates the actual dosing percentage.

Sensor status

Readout of the current sensor status.

Am./Anim

Readout of the calculated daily amount per animal. This amount is based on the dosing
percentage. After adjusting

Day Am

the dosing percentage will be automatically

recalculated.

Cycle

Readout of the number of feed cycles.

Biorhythm

Setting which biorhythm percentage must be used during a cycle. This percentage
could be positive (+) and negative (-).

The sum of the percentages must be 0%.

The biorhythm change the distribution of the portion during the day. This
enables less feed to be supplied in the evening and more in the morning.

To be dosed

Readout of the feed amount to be supplied during this cycle.

Temporarily supply more feed, e.g. if animal growth is slower than expected.
Enter this when setting up the animals, or later.

Dosed

Readout of the feed amount that already has been dosed out.

Total

Readout of the calculated amount by

To be dosed

and

Dosed

Содержание LUMINA 71






















































Результаты поиска

Содержание LUMINA 71

Отзывы:

Похожие инструкции для LUMINA 71

Бренды по названию

Популярные бренды

Fancom LUMINA 71, Руководство пользователя

Результаты поиска

Содержание LUMINA 71

Отзывы:

Похожие инструкции для LUMINA 71

Бренды по названию

Популярные бренды