manualshive.com logo in svg

Fancom 750, Руководство пользователя, Страница: 34 / 61

Поделиться
Скачать
Fancom 750 Скачать руководство пользователя страница 34

Lumina 750

 Alarm

System alarms
Alarm

Cause

Backup alarm

The computer will be active on factory settings. Please check the settings.

Watchdog alarm
Communication alarm
Setting changed
Stack overflow
Communication

assignment
EPROM error
RAM error

System alarms do not normally occur. Contact the installer

immediately if these system alarms are displayed.

 

 

4.1.1

Dealing with alarms

If the value responsible for causing the alarm comes within the alarm limits again, the situation is

considered recovered and the alarm is no longer active. The siren automatically disables and the

alarm status changes into 

Alarm recovered

. This message remains visible so you can see what

caused the alarm. Press 

 (behind the the alarm message) to recover the alarm status.

If an alarm occurs the LED strip and the alarm icon will flash red. Perform the following actions in case of a:

Loud alarm

1. Press 

. The alarm overview displays the alarm status 

Alarm

 and shows the alarm message.

2. Press 

 (behind the alarm message). The siren will temporarily go off and the alarm status changes to

Alarm temp. off

. The alarm message remains visible to investigate what caused the problem.

3. Solve the alarm situation. When the alarm situation is solved the alarm status changes to 

Alarm stand by

.

Silent alarm

1. Press 

. The alarm overview displays the alarm status 

Alarm

 and shows the alarm message.

2. Solve the alarm situation.

3. Press 

 (behind the alarm message). The alarm message will disappear and the alarm status changes

into 

Alarm temp. off

 followed by 

Alarm stand by

.

4.1.2

Disabling the alarm

If the alarm is disabled the control computer will not generate any alarm messages (except system

alarms). Never switch the alarm off during regular operation.

The alarm can be fully disabled. Disable the alarm as follows:

1. Press 

 and choose 

.

2.

Change the alarm status to 

Off

. The control computer will give a warning to indicate that the entire alarm

system has been disabled and 

 will flash red.

Reactivate the alarm by changing the alarm status to 

Alarm stand by

. The alarm message states that the alarm

has been disabled and is active again. The message will be cleared from the alarm overview.
 

31

Содержание 750






























































Отзывы:

Нет отзывов