manualshive.com logo in svg

Fancom 750, Руководство пользователя, Страница: 23 / 61

Поделиться
Скачать
Fancom 750 Скачать руководство пользователя страница 23

Lumina 750

 Using the Lumina 750

 

à

 Dial 

 

Readout of the average compost temperature (°C /°F). Faulty sensors and sensors

showing a too great deviation are not used for this calculation.

●

The control computer will automatically set sensors showing a temperature

that differs too much from the previous average temperature (more than the

maximum deviation) to non-active. These sensors will have to be re-activated

manually if they are to be included in the calculation of the 

Average compost

temperature

.

●

The computer will reactivate all non-active sensors after the 

EMPTY

 phase

(phase 0).

If there are only two sensors remaining to calculate the 

Average compost

temperature

, the computer will only de-activate them if they are faulty.

Readout of the current compost temperature control value (°C /°F). At the beginning

of each growing phase the control value is automatically set to the 

Average

compost temperature

. The control computer will gradually regulate the compost

temperature towards the 

Compost temperature end value

.

Readout of the lowest measured compost temperature (°C /°F) from sensors that

are included in the calculation of the 

Average compost temperature

.

Readout of the highest measured compost temperature (°C /°F) from sensors that

are included in the calculation of the 

Average compost temperature

.

Setting of the end temperature of the compost (°C /°F). The control computer will

gradually regulate the 

Compost temperature control value

 towards the end value.

Setting of the adjustment speed of the 

Compost temperature control value

 (°C/hour

or °F/hour).

 

3.1.8

O2 control

Classic O

2

 control settings: Function key 4: O2/CO2/NH3 (page 40).

20

Содержание 750






























































Отзывы:

Нет отзывов