Two post hydraulic lift QJY3.0-E
11
2. Slowly position vehicle midway between adapters. Apply the parking brake.
3. Swing and telescope arms as required to position adapters under vehicle manufacturer's
recommended lift points.
4. Turn the disk adapters that they evenly contact all four lift points.
5. Leave vehicle and remain clear of lift.
Always lift the vehicle using all four adapters.
5.2.2 Raising
During raising and lowering cycles: Closely watch the vehicle and the lift, do not
allow anyone to stay in lift area and make sure the vehicle doors are closed.
Once the disk adapters contact the lift points, check arm restraints for engagement.
After raising the vehicle briefly, stop and check adapters for secure contact.
l
Turn the main switch to position ON and the lift is ready for operation.
l
Push and hold UP button until lift reaches desired height, the lift stops once button is
released or top travel limit is reached.
5.2.3 Vehicle in Raised Position
l
Observe all accident prevention regulations.
l
Do not allow unauthorized persons to stay under the raised
vehicle.
l
Avoid rocking of vehicle.
l
Keep lift free of tools, parts, etc.
l
Fasten the vehicle to the support arms using lashing straps
when removing or installing heavy components.
5.2.4 Set on Locks
Use the unloading handle to set the lift on the nearest mechanical locks.
In this way the vehicle can be securely fixed when the vehicle is in a raised position.
