Two post hydraulic lift QJY3.0-E
10
5.1 Controls
5.1.1 Control Unit
1. Green button: Raise the lift
2. Unloading handle: lower the lift, hold-to-run type control.
5.1.2 Arm restraint
Once the disk adapters contact the lift points, check arm restraints for engagement.
If necessary, slightly move the arms until the gear segments mesh.
Never unlatch the arm restraints when the lift is under load.
Each support arm is provided with an automatic arm restraint which unlatches automatically
when the lift is in bottom position.
When the carriages are in a raised position, the arm restraint can be disengaged by pulling the
pull-handle.
5.2 Operation
5.2.1 Preparations
1. Fully lower the lift and swing the arms to full drive-through position.
Unloading handle
