44
45
English
English
6. Specifications
Display:
Time of therapy in minutes,
7 light-emitting diodes
Therapy steps 1 - 3
Exchange light-emitting diode battery
Error messages:
Intermittent tone:
handholds or contact areas are not applied properly
Continuous tone:
handholds have short circuited
Battery:
IEC 6LR61 9-volt block battery
Output voltage:
AC, maximum 9-volt pp and minimum 6-volt pp
Duration of
treatment:
3 - 21 minutes
Programme
sequence:
3 steps
Measurements:
Length: 18 cm, diameter: 3.1 cm
Weight:
≈ 1100 g
Application class:
BF
Safety class:
IIa unit
Operation:
10°C - 40°C
Humidity 30% - 75% without condensation, air
pressure 700 hPa - 1060 hPa
Please refer to instruction
manual!
Production Date
month / year-serial number
6. Handling
1. Turning on the device: push I/GO button briefly.
2. Set appropriate therapy time per step by means of TIME button.
Start with one minute per step, i.e. the complete treatment time is
3 minutes. Increase the time with every treatment by 1 minute per
step. Complete steps 1 and 2 (see below and beside) once a day.
3. Place device on trigger point.
4. Start treatment by pushing the I/GO button.
5. You will hear a beep signal after completion of every step.
6. The end of the treatment is announced with two beep signals.
7. Turning off the device: push I/GO button for a prolonged period of
time or device turns off automatically after 30 seconds.
Error message: Insufficient or no skin contact is
indicated with continuous beep signals.
Step 1
Local treatment at trigger point
