manualshive.com logo in svg

Famco Danfoss Maneurop MT, Руководство пользователя, Страница: 244 / 294

Поделиться
Скачать
Famco Danfoss Maneurop MT Скачать руководство пользователя страница 244

In addition to the existing SM range compressors 
previously available, Danfoss is completing its 
range with 3 compressors. 

The new SM112-124 and SM/SZ147 compressors 
benefit from a further improved design to 
achieve the highest efficiency.

•  Gas circulation, motor cooling and oil 

behaviour are improved by a new patented 
motor cap design. 

•  Part protection and assembly reduces internal 

leaks and increases life durability.

•  Improved part isolation reduces greatly 

acoustic levels.

•  Gas intake design induces higher resistance to 

liquid slugging.

Features

SM 112-124 - SM/SZ147

Heat shield that lowers the heat transfer between 

discharge and suction gas and the acoustic level

R22 optimized scroll profile

Improved lower bearing centring

Patented motor centring spacer

Patented motor cap

New PTFE spring seal for even lower leaks

6

FRCC.PC.003.B4.02

Application Guidelines

Содержание Danfoss Maneurop MT







































































































































































































































































































Отзывы:

Нет отзывов