Famco Danfoss Maneurop MT, Руководство пользователя

Страница: 168 / 294

Manage superheat
Test, criteria and solutions
Test N° Purpose Test condition Pass criteria Solutions
Liquid flood
back test
Steady-state
Liquid flood back testing must be
carried out under expansion valve
threshold operating conditions: a
high pressure ratio and minimum
evaporator load (A).
Oil superheat>10K
Steady-state discharge
superheat>15K
1. Check expansion valve selection
and setting.
2. Add a suction accumulator*.
Transient
Tests must be carried out with most
unfavorable conditions :
• fan staging,
• compressor staging
• …
Oil superheat>10K
Transient discharge superheat >5K
1. Check expansion valve selection
and setting.
-For Thermostatic expansion valve
(TXV) check bulb position...
-For Electronic expansion valve
(EXV) check measurement chain and
PID....
2. Add a suction accumulator*.
Defrost test
Check liquid
floodback
during defrost
cycle
Defrost test must be carried out in
the most unfavorable condition (at
0°C evaporating temperature).
Oil superheat>10K
Transient discharge superheat >5K
In reversible systems, the defrost
logic can be worked out to limit
liquid floodback effect. (for more
details see “Control Logic”).
*Suction accumulator offers protection by trapping the liquid refrigerant upstream from the compressor. The accumulator should be
sized at least 50 % of the total system charge. Suction accumulator dimensions can impact oil return (gas velocity, oil return hole size…),
therefore oil return has to be checked according to section “Manage oil in the circuit”.
A
32
FRCC.PC.012.A7.02
GENER
AL INFORM
ATION
PR
ODUC
T INFORM
ATION
INTEGR
ATION INT
O SY
STEM
ORDERING INFORM
ATION
SY
STEM DESIGN