ORIGINAL INSTRUCTIONS TRANSLATION
Pag.
di
13
13
FREQUENCY
PERSONNEL
MODALITY
THINGS NOT TO DO BEFORE OR DURING THE CLEANING:
Enter towards the moving elements without to be previously checked of their stop;
Enter towards the moving elements without have stopped it in safety stop (blockage in zero
position of the electric feeding sectioning devices)
PRODUCTS NOT TO USE:
Compressed air with jets towards the zones with flour warehouses and in general towards
the machine
;
Vapor equipment
;
Detergent that contains CHLORO (also if diluted) or its compounds as: the bleach, the
muriatic acid, products to clear the drain, products for the marble cleaning, in general
decalcifying, etc … can attack the steel composition, staining and oxidizing it unavoidable.
The only above described products fumes can oxidize and in any case corrode the steel
;
Steel wool, brushes or abrasive discs produced with other metals or alloys (ex. Common
steel, aluminum, brass, etc…) or tools that have previously cleaned other metals or alloys,
that except to scratch the surface
.
Detergents in abrasive dust
;
Fuel, solvents or inflammable and/or corrosive fluids
;
Substances used to clean the silver.
CHAP. 6.
SELLING
The crossed container symbol on the machine shows that the product at the end of its
useful life must be collected separately from other refusals
If we decide to not use ever the machine because it is obsolete, damaged or worn, its out of service must be entrusted to
specialized and trained personnel. At the end of the dismantling activities all identification plates and other document must be
destroyed. The machine can be sold without the possibility to reduce it in small pieces; it is sufficient to disconnect the main
groups that compose it and to send them for the scrapping.
Don’t sell the machine like mixed urban refusal, perform the waste separation.
The machine collection or harvest systems are:
•
Collection through distributor consortium
•
Delivery possibility to the machine distributor equivalent to the purchasing certificate of a new machine.
In the machine there aren’t dangerous substances with potentially negative effects on the ambient and on the human health. It is
fundamental that the purchasers contribute to the reuse, to the recycling and to the other forms of machine restoring. It is the
employer obligation to be aware of the actual laws of own country and work so to be comply with these legislations.
It is forbidden and besides liable of penalties to leave the machine and the electric equipment in the
ambient.
•
CHAP. 7.
MANUFACTURING MATERIALS
In accordance with the functioning and production requirements, the machine can be constituted with different typology of
manufacturing materials.
GROUP
MATERIALS TYPOLOGY
Stainless Steel
AISI 304
Plastic for food
Machine body
●
Mixer cutting tool
●
Mixer tool bin
●
Mixer tool pipe
●
Reducer case for whisk tool
●
Whisk tool
●
ENGL
ISH
