Faller 163701, Инструкция по эксплуатации, Страница: 106 / 150

106
Converting the vehicle
EN
X
On the universal PCB detach both outgoing cables of the motor.
Leave unchanged both cables on the side that leads in the motor. Do
not damage both connecting cables of the motor.
Fig. 25: Lorry model with universal PCB, soldered batteries, without wiring
X
Using a side cutter interrupt the connection to the dry-reed sensor
while taking care to leave the wire length as long as possible, see
Fig. 26 .
Fig. 26: Separating the dry-reed sensor
X
Using a modeller’s knife cut, on the upper side of the universal PCB,
five of the strip conductors in accordance with
Fig. 27 .