17
3.8 PREHEAT
3.8.1
Go to start up menu on screen, ensure unit is on manual mode as shown
below (relevant mode circled in yellow):
3.8.2
Touching the
PREHEAT
icon will begin to preheat the oven.
Note: If the oven is already at or above temperature the screen will display the message
‘Ready for loading food’
*Shown without temp display
*Shown with temp display.
3.8.3
The screen
will change to show that the oven is preheating. The LED’s on the
gantry will change from
Green
to
Yellow.
3.8.4
This mode will continue until the Stop
Icon is touched or if it completes
its cycle.
When the pre-heat cycle is complete. A display on the screen will indicate to the user to load
food and The LED’s on the gantry will change to flashing
Green
accompanied by a short
buzzing sound to indicate that the timer has finished (if buzzer is switched on).
3.8.5
To clear this message open door and load food.
PRE HEAT temperatures can be altered to do this go to the “
MANAGERS: TEMPERATURE
MENU
”
SETTING as per section 4.10.