11
2.2 16A SUPPLY
When a trolley with a 16A commando plug fitted needs to be plugged into a
13A supply, use the 16A to 13A adaptor lead, as shown below.
NOTE: ONLY USE THE ADAPTOR LEAD WHEN THE TROLLEY IS IN
HOLD MODE. DO NOT USE WHEN THE TROLLEY IS IN COOK
PRE-HEAT, BOOST OR CLEAN MODE.
2.3 MANOEUVRING THE TROLLEY
TAKE CARE WHEN MOVING AN APPLIANCE FITTED WITH
CASTORS.
•
Check that the Trolley is unplugged before moving, and the cable is stored safely.
•
Pushing from the plug side is the preferred method of moving the trolley, pulling the
trolley should be kept to a minimum and only when pushing is impractical.
•
Proper footwear should be worn.
•
Ensure tray slide and side shelves are down.
•
Ensure all items on the trolley are well secured within the chambers.
•
Due care and attention must be paid during movement to avoid collisions.
•
Take care when manoeuvring through doors and into lifts, lock open lift doors if
possible.
•
Once the destination has been reached, ensure that the trolley is not blocking any
gangways, doorways or fire exits. Ensure the supply cord will not create a trip
hazard. Apply the foot brakes on castors. Plug the Trolley in.
•
Do not overload appliance.
•
Mobile units may build up a static charge, this is not a fault and charge will be
discharged when appliance is plugged in.