Falcon G402F, Инструкция по установке, обслуживанию и эксплуатации

Страница: 5 / 23

5
2.4.1 G401F Fryer Control Panel (See Figure 2)
2
1
3
2 5 3
1
4
4
Figure 2 – G401F Control Panel
1. ON/OFF and Temperature Control Knob
Temperature Selection (130 - 190°C). (Unit is off when
control is in position indicated).
2. Fat Melt Position
Feature for slow pulsed heating of solid fats.
3. Power on indicator.
4. Heat Demand Indicator
Illuminates when thermostat demands heat, i.e. oil
temperature is more than 5
⁰
C below temperature setting.
Extinguishes when desired temperature is reached.
2.4.2 G402F Fryer Control Panel (See Figure 3)
Figure 3 – G402F Control Panel
1. Four Digit LED Display
Displays Set temp, Actual temp, cook time remaining and
also used for programming purposes.
2. Program Button
Used to enter timer programme mode (to change each of
the 4 pre-set timer select channels - See Section 6).
3. Temperature Button
Used to view Actual/Set temperature and also to enter
Set temperature mode (See Section 6).
4. Timer Keys (1 – 4)
Used to start/cancel pre set cook times. Buttons 1 & 4
also used to change times or temperatures when in
either set mode (See Section 6).
5. Heat demand LED indicator
Illuminates when thermostat demands heat, i.e. oil is
more than 2
⁰
C below programmed set temperature. Will
extinguish when desired setting is reached.
2.4.3 G401F & G402F - Additional Controls
(See Figure 4)
The following additional controls are located behind
cabinet door.
1. Burner and Temperature Controls ON/OFF Switch
Cuts power to burner and temp controls.
2. Burner Lockout Indicator
Indicates flame failure.